Это видео недоступно.
Сожалеем об этом.
Disassembling a 1968 Chevelle
HTML-код
- Опубликовано: 4 фев 2024
- 1968 Chevelle Episode 4:
Mike and Blair continue to disassemble Mike's 1968 Chevelle in preparation for the bodywork and painting that needs to be done to it! It's a race against time in order to get the Chevelle ready for Motorama 2024!!!
-------------------------------------------------------------------------------------------------------------------
If You Enjoyed this Video Make Sure to Check Out All our Other Socials!!!
Main Link for all platforms - mtr.bio/rustbrosrestos
Facebook - / rustbrosrestos
Instagram - / rustbrosrestos
TikTok - / rustbrosrestos
X - / rustbros_restos
#rustbros #rustvalleyrestorers #restoration
I’m so happy he is finally giving her a good tune up fresh coat of paint
Chevelle will look absolutely killer for the trip coming up! Cant wait to see the final result!
Cant wait see yall drive it all the way that far off trip, good luck Mike and Blair, yall work fast
Awesome work guys
Great memories, we used to do this all the time. Love hearing them laughing!
I'm so glad you guys are doing RUclips and you are still going strong with builds
Heck Blair you let that Mike no.. cut no corners do it right, love your work👍
Well Mike sure gets a lot of exercise walking back & forth that tool chest doesn't he? lol. I love this channel.
Keep on keeping on.!!
Mike and Blair.. 2 great guys
Mike Hall boa noite um abraço do BRASIL Agora podemos ver vc aqui na América do Sul novamente.
Hey guys enjoy watching you all doing well I'm sure thinking that you need another shop to store all your gear into lol blessings everyone 😊
This is one of my favorite cars of all time!!!!!!!!!!!!!!
Love to see you restore that old ford crew cab.
Love seeing the crew on RUclips. A gimbal would go a long way in raising the video quality. Keep up the good work. I’m putting together my 68 Chevelle Malibu as well.
Mike knows where everything is inside those tool boxes probably
Ya he is the Poster child for most organized and OCD I wish my box looked like that 🤣🤣
How hard is it not to swear 🤣🤣 I can’t imagine the amount of concentration it must take to remember not to 🤣🤣 That car is lookin good !
Mike! If you want to start making a profit on your builds surround yourself with productive people to help you achieve your goals. While Blair and Avery may be good friends of yours they’re both a boat anchor to your productivity. Tits on a bull are more useful than Blair! Time to CLEAN HOUSE!
@@fios4mewtf is wrong with you? Blair is an amazing builder, have you seen what he does? High end builds sweetie... Now get informed before you start talking sh*t
The knowledge Mike has about classic cars is legendary
Big Mike your the man lifting the Chevelle hood off alone. I know
What that takes to do with the balancing act alone so ya don’t knock the glass out of it. Then the weight of it to lift off. Keep on keeping on guys ….. A-body !👍
Old school wrenching 😮 swivels Milwaukee does help the Old to save time for fishing Mike❤
Enjoying every second your spending on the Chevelle,Mick
Didn’t know you guys were on RUclips now. Glad to see all the content ! Keep it up guys, always a fun watch seeing what you guys are up to.
You doing great job Mike
Poor Blair , sombody get that guy a Puppers! Can't be easy working with a Samsquanch 😆
"Wow" that's a big shop with a BIG Mess....lol nice to see the "📹"
best looking years 68-69
For sure the 68-69 Chevelles look good! I have 69 olds 442.....also really good lookin in 68-69....70-72 not great....and the rest up till the 78-88 Gbody platform look good.
Great Video the car will be awesome when done
Hey I watch you on tv Al the time now Utube great stuff 😮
Great Video you guys I also have a Chevelle 1969 documented SS
Mike is a bull in a China shop. lol love it so genuine.
Matt your like a friggin athlete just charging through the clutter never wiping out while keeping Mikey perfectly in frame stellar work brother 👌..."Mike your a moron" LOL Nothing but brother love with all you guys what a pleasant shop atmosphere love it guys.
Good luck working on the chevelle, Roland
I genuinely enjoy watching the video's guys.
32:00 I just used this song in an edit for a tv commercial. Nice selection Matt
Love all what you do keep it up ❤❤❤so happy I can see your team take care Mike
Now that was good work by the cameraman.. we knew he was there he put the focus on Mike and Blair not himself great job camera guy
The camera guy is Matt who is the content creator of Rust Valley Restores. Since season 1 :) Kudos to you Matt!! :)
Good work is making sure the camera isn’t bouncing all over the place when moving! This guy sucks at it! They need a better camera operator!
Love your videos keep them coming Mike thanks for sharing. God bless.
Hi Mike and Blair the Chevy is going to look awesome again .I remember the first time I saw it on the first time it was on the videos back in the day.wheres the ladies that was on the show need to have a home coming like it's great to have y'all back and on RUclips I hope you are putting bigger tires on the back of the Chevelle the small one doesn't do it justice LoL Love y'all Mike.
Was just looking for a new upload, Ask and you shall recieve 😂 Hope you boys are doing good
26:48 I’ve seen these bushings shatter when hammered. Better to press them in with a nut/bolt combo.
i just wanna go there and clean up that shop.....that would be SO satifiying.....but then if everything is put away proper Mike wouldnt be able to find anything
Very fun show ❤❤❤
that was a quality ending :)
Love every step by step you show details very educational imo not all do this with the editing the videos very realistic just the way I like it Mike and Blair and also camera man/editor thanks a bunch.🎉🎉🎉
A place for everything and everything in its place. Organized chaos is how real shops role 👌🤣
Lol... wrong
Wellll I mean not all well functioning low staffed shops are completely spotless and 100% organized. Especially if the time found to really organize isn’t there because your constantly busy trying to finish jobs that tools just end up at a different work bench because at the end of the day if you don’t have ten people working for just you you’re too damn exhausted to put that tool away when you know you’re just going to need it bright and early the next morning 🤷♀️ all hypothetically of course and yes the extremely spotless organized shops that have a full staff and hundreds of thousands of dollars to spend to hire people to help with what ever mess is made but at the end of the day there’s still a place for everything and everything in its place ;)
We'll have to agree to disagree... it only takes a few extra seconds to put something back.... iv been in the trad3 for 25 plus years and so far it's been working for me
I don’t disagree with you haha some days things are back where they belong and other days things are left and used for that whole week. Ever had one day where you were so damn exhausted you didn’t 100% clean up because you knew you would use the same tools in a matter of hours? Definitely don’t disagree, there are some messy unsuccessful shops but there are some , like rust bros, that are still successful amongst the mess and chaos :)
I just couldn't work like that. That's all
Hey Mike !! Consider getting your camera man a gimbal mount for your camera it helps keeps the scenes your shooting buttery smooth instead of it shaking around ! Other wise keep up good work
Hello from the Quebec
Consistent following here
‘66 and’67 also started with 138 for an SS. Malibus were were all 136 cars. I have 2 ‘66 SS cars. 396
It’s like watching chaos haha. Entertaining though.
Your show is so awesome guys
It’s great to get more rust bros need Avery but I would binge watch the Netflix series in a day so this is a must have !!
Flintstone Butter fingers Mike! lol
Good evening boys I hope all is well and the show is amazing
I needed 3 people to do my 69 rag SS hood and still cross threaded one of the bolt holes! Cross thread is still better than no thread !!
That chevelle is all primed by now I bet lol
I’m re watching the 2nd “Hit to pass” episode and I’m laughing soooo hard when Connor is explaining how the qualifying laps you’re suppose to wait until the race and THAN you hit the motorhome and Avery just kinda went for it on lap 4 of the qualify😂😂😂😂😂
where ever mike passes he makes a mess worse, but his work progresses.. Rasta Blasta Sasquatch.
Can't wait to see this thing finished Mike! hope to see you at motorama !
Haa.ha.. ha.. It just never end Mike.. lol
My dream car ❤
How come nobody talks to that sweet Lab walking around? Only Lincoln. ❤❤😂
Haha cant hold the camera still laughing at Mike. Awesome.
Hey guys we're the winners picked for all the rust valley swag? Keep up the great work
Blair must have the patience of a saint....does remind me of Dave Crosby???did it need a flash spray.....looks good to me.....
Damn car look really nice with like all brownies real dark brown collar but at night time they look like they’re black it’s awesome I’ll see you in a Chevelle panic attack color and it was nice
Best channel on RUclips!
Can’t wait till see it when its brought back to life
Watching this now, 😊
Awesome! Made my day when I saw you had started a RUclips channel. I sat in and binge watched most of the day. You all are the only ones that seem to do TOTAL restorations. Except maybe Grave Yard cars ( I get tired of watching Cuda restorations) and Gothic Garage (quick cash partial restorations and resto mods ). West Coast Customs seems to be just about the money. Don't get me wrong; I love Cudas and a good resto mod . It would be wicked if you could give more background information about the people who were in the series and their vehicles. Like Conner, does he still have the Chevy II? What happened with Cassidy and her pickup? I'm just curious. Don't worry about the videography; I can already tell that it's improving. SV Delos pretty much started out just showing pictures.
I love watching the videos and I love the TV show. Do you did keep going keep working never stop thanks
I need to see those doors closing right!!!
Got to do my 94 dakota driver door pins, thing bout it is only bolts on cabin side, so no room have take fender off, damn😊
Hey kids ! ... Play Safe and have fun !..
No idea how they get any work done in that shop but they do. Guess it works for them.
Love the videos!
Always wanted a 68 chevelle SS 396…
Sorry bout that Alex i was wondering why the cameraman was soo quite its not Matt well looks like yor the athlete of the day Alex thanks for your hard work budd much appreciated 👍
I'm glad my shop isn't as a mess like yours
Just a thought I used to put the bushing on my thumb fill it with oil and squeeze that enpregnates them because they are porous
Back on the farm it took 3 guys to lift a hood.
Crunch time !!!
Check out Cold War Motors, he has a great set up for doors. A stand that can hold doors for painting.
You can junk the Rustang too.
And I thought my shop was cluttered...lol
Cantcwait to see the end product on the chevelle its a bad ass car and damit mike droppin bolts 😂
Most wood ,wood clean Frist wood and thx for the wood
Awesome car
Essas seri tem que voltar pra Netflix
Netflix said no. Netflix doesn't want to show the new episodes.
In my younger years I was a Canadian Air Force Supply Tech and my last posting was at CFB Esquimalt outside Victoria, BC. I mention this because your inventory system gives me grief. Given 6-8 months, I could probably implement location systems and get your inventory in half-assed and usable (digital) shape for a reasonable person. That said, Mike, I don't think you'd be able to find anything using someone else's system. Keep doing what you're doing. Very entertaining. 🤣
That's what she said, Michael she wanted it either. She had the clothes are legs. Ha ha ha Kevin fun, buddy.❤❤❤❤❤❤❤
New dash going back in
If that VIN starts with "5D" then it's a GMC Sprint Custom.
👍👍
Just an fyi you can twist them hinges to align them without die grinding them out!
When are you guys coming back here? I want you guys to see my Gold mine.
If you get that door pin red hot with the torch,then bang it like Blare was doing,it might work a bit better.
No. Heating expands metal.
@@jeepstuff4004 not the whole pin ,just the head of the pin.to mushroom it like a rivet.
It's never simple lol 😆
👍
سلام عشق ها 🎉❤❤❤❤من از ایران دنبال میکنم ماشین عالی ای کاش مایم اون جا بودیم ❤❤❤❤❤❤